FAQs

We have all the answers for your SDK-related questions. If you don't see your question below, please contact your sales representative or contact us.

What does the SDK do?

The InterLink SDK accurately estimates frost accumulation on the evaporator coil and decides if it can skip the preprogrammed defrost period that is set on the defrost time clock. This helps eliminate unneeded defrost cycles saving energy and increasing product integrity.

What are the primary features and benefits of the SDK?

The SDK saves energy by skipping unnecessary defrosts. It lowers the overall average daily box temperature, resulting in a more stable box temperature leading to increased product integrity.

How is the SDK different from Beacon II Smart Defrost?

The Beacon II Smart Defrost system is only available factory installed on HRP branded systems. The Beacon II system reduces defrosts by 75-80%; whereas the SDK can be mounted on an installed condensing unit and reduces defrost by 30% to 40%

When will SDK be available?

The InterLink SDK will be available in March 2007. Pre-orders are being accepted now. Talk to your sales representative for more information.

Can the SDK mount on any unit?

The InterLink SDK can be installed on an electric defrost freezer system with an electro-mechanical time clock such as the Paragon 8145 or Grasslin timer. The SDK is certified to work on all Bohn, Larkin, Climate Control and Chandler equipment.

How does it work?

The Smart Defrost Kit uses a series of sensors and inputs to accurately estimate the amount of frost accumulation on the evaporator coil. It utilizes a complex patent pending algorithm that learns and adapts to every application. If the SDK determines that a defrost is not required at the prescribed defrost time it will initiate a skip of that defrost.

How much does it cost?

It will cost an end user between $400 and $600 per system.

How long will it take to install?

Less than 1 hour for most all systems.

How much will it save?

Example 3HP systems about $150/Year
Example 7.5HP systems about $350/Year
Example 15HP system about $800/Year
There may be rebates in your area - check back often for more information.

What is the warranty for an SDK?

Twelve months from date of installation or 18 months from date of shipment.

What is included in the SDK?

SDK Module
Pressure Transducer
Temperature Sensor
Schrader “T”
Mounting Screws
Instructions
LED Label